PEC--T7104-12CNG50
One Hose Stand Alone Transit CNG Dispense
This dispenser is a single-line dispenser that meters the gas and gives you a display on both sides of the dispenser. The dispenser has 1, 4-20mA output that can send flow or temperature to a remote controller. The dispenser has a 120VAC hook switch for an "in use" signal and will send pulses to a card reader or a console. The Micro Motion ® sensors and Transmitters are located within the dispenser body and are factory set up and calibrated before shipment. PEC assembles an AGA 1-93 approved Parker Parflex CNG fill hose on all its dispensers. The Breakaway is the Sherex In-Line type with a unique vent Breakaway attached to the fill hose breakaway. All PEC CNG Dispensers have an ASME pressure relief valve inside the dispenser cabinet with a vent stack up through the dispenser body. The cabinet is constructed of 11-gauge cold roll steel with a powder-coated finish; stainless steel material is optional. The high body style gives you the look of contemporary gasoline dispenser. The standard color is black but any custom colors can be applied to the dispenser body. This dispenser is rated for a MAWP of 4500psi. This dispenser will temperature compensate the fill using the Acufill fill algorithm. It will also supply the compressor with a dry contact or a 120VAC output as an in-use signal.
Contact Phoenix for information on pricing or service.
Dispenser Includes
- 1 Manual shut off valve 3/4" port Sequencing Valves 1 Inline Sherex hose break away 1 Sherex CT5000 Nozzle 1 Automatic air operated ball valve with 3/4" port 1 3/4" x 3/8" fill hose 1 ASME Relief Valve installed in dispenser body and vented out top 1 Parker Finite J6 Filter. grade 4 element 1 Micro Motion CNG 50 Meter rated for 185lbs per minute 1 6000 psi pressure gage 1 Pit box to support dispenser in concrete 1 Display electronics with backlighted displays
Optional
- Two Drop Sequencing Solenoid Valve Panel Remote from Dispenser
- Two Drop Sequencing ½" Ball Valve Panel Remote from Dispenser
- NGV1 Type 2 Refueling Connector Nozzle (Staubli)
- NGV1 Type 1 Refueling Nozzle Sherex CT1000
- 2 Parker Finite J2SD Filters Installed in Dispenser w/ Block and Bleed Valves
- Dispenser Base Shear Break-away System Installed in Dispenser
- Stainless Steel Body with powder coat paint
- Pressure Regulator used when dual pressure and elevated storage
- Upgrade to ½" Hose
- High Flow Rate Nozzles call for quote
This dispenser is manufactured under the guidelines of:
NFPA 52, NFPA 70 (NEC), ANSI/IAS NGV 4.0-1999 CSA 12.00-M99, ANSI B31.3, CE (on request)